Hubcap WIND 17" silver

These hubcaps are suitable for most car models fitted with steel rims. Thanks to the adjustable rim, the hubcap can be perfectly fitted to the rim. They are not suitable for convex rimsADVANTAGES:HIGH QUALITY ABS plasticDURABILITY – resistant to impact and changing weather conditionsSAFETY – the plastic clips do not damage the rimsEASY INSTALLATION – no additional tools requiredSTYLISH APPEARANCETo select the correct size of hubcap, check the rim diameter – this information can be found on the tyre. The number following the ‘R’ symbol indicates the tyre diameter.FITTING:Remove any existing wheel covers from the wheel rim and clean the outer surfacePosition the steel expansion ring so that the notch aligns with the valve, and press it into the slots of the clamping tabs.Place the hubcap onto the rim so that the valve opening in the hubcap aligns with the valve on the rim.Place the hubcap onto the lower part of the rim, support it with your knee, press (tilt) the top two clamping tabs downwards with your fingers from the top of the hubcap, and at the same time press the hubcap inwards towards the rim edge.Press firmly all the way round the rim.